Search results for "thermal [correlation function]"
showing 10 items of 1923 documents
Numerical study of the accuracy of temperature measurement by thermocouples in small-scale reactors
2018
Proper temperature measurement is imperative in any laboratory study if reliable data are to be obtained, particularly in the field of chemical kinetics. In this paper we analyze in silico some typical thermowell configurations used in small-scale reactors by coupling computational fluid dynamics (CFD) with conjugated heat transfer phenomena. This allows us to identify deviations in measurements arising from thermal radiation and self-conductivity in mid and high temperature ranges, in addition to radial temperature gradients. A novel design is proposed and optimized by additional simulation, showing potential for faster and more accurate temperature measurements.
Effect of Isovalent Substitution on the Thermoelectric Properties of the Cu2ZnGeSe4–xSx Series of Solid Solutions
2013
Knowledge of structure–property relationships is a key feature of materials design. The control of thermal transport has proven to be crucial for the optimization of thermoelectric materials. We report the synthesis, chemical characterization, thermoelectric transport properties, and thermal transport calculations of the complete solid solution series Cu_2ZnGeSe_(4–x)S_x (x = 0–4). Throughout the substitution series a continuous Vegard-like behavior of the lattice parameters, bond distances, optical band gap energies, and sound velocities are found, which enables the tuning of these properties adjusting the initial composition. Refinements of the special chalcogen positions revealed a chang…
Reactivity of cellulose during hydrothermal carbonization of lignocellulosic biomass
2020
Abstract Hydrothermal carbonization (HTC) of pure cellulose (CE) and birchwood (BW) samples was carried out at temperatures between 160 and 280 °C, 0.5 h residence time and biomass-to-water ratio 1:5, to investigate the reactivity of cellulose in lignocellulosic biomass. Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) showed that the CE samples remained unaltered at temperatures up to 220 °C, but were significantly decomposed at 230 °C producing a thermal recalcitrant aromatic and high energy-dense material. FTIR showed that dehydration and aromatization reactions occurred at temperature equal or higher than 230 °C for the CE samples while a similar incre…
Pyrolysis study of sol-gel derived TiO2powders
2004
An amorphous TiO2 gel was obtained by hydrolysing titanium(IV) isopropoxide with a stoichiometric amount of water using SnCl2 as catalyst. In these operative conditions, a TiO2 gel matrix containing a lower fraction of organic residual was obtained with respect to samples prepared by previously modifying the titanium alkoxide precursor with chelating ligands. Dried gel powders were characterized by N2 adsorption analyses, FT-IR and XRD measurements. Thermogravimetric (TG) and differential thermal analysis (DTA) coupled with mass spectrometric (MS) and gas chromatographic (GC) measurements were performed in order to identify the organic products released from TiO2 gel pyrolysis. The Tg-MS se…
Influence of the Preparation Temperature on the Photocatalytic Activity of 3D-Ordered Macroporous Anatase Formed with an Opal Polymer Template
2018
Even if many aspects of three-dimensionally ordered macroporous (3DOM) titania have been extensively studied, the interplay between the amorphous and crystalline components of their skeleton wall has not attracted too much attention, although it should strongly influence the properties of these materials. In order to gain new insight on this interplay, we have studied in detail the wall structure of three 3DOM titania samples prepared by heating the 3DOM titania precursor at 673, 773, and 873 K by X-ray diffraction, thermogravimetric analysis, differential thermal analysis, N2 adsorption/desorption, pore-size distribution, high-resolution transmission electron microscopy, and IHmagic-angle-…
Synthesis and thermal behavior of Janus dendrimers, part 1
2010
Abstract Eight Janus-type dendrimers up to the second generation were synthesized, and their thermal properties were evaluated. Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-dihexyloxybenzoic acid or 3,4-dihexadecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The structures of the molecules were verified with 1 H NMR, 13 C NMR, ESI TOF mass spectrometry and elemental analysis. The thermal stability was evaluated by thermogravimetric analysis, displaying onset decomposition temperatures ( T d ) ranging from 241 to 308 °C. Phase transitions were studied by differential scanning calorimetry. Based on the performed studie…
Preparation and characterization of gels with garnet structure: A3B2C3O12, using ‘non-classical’ solvents
1992
Abstract Synthesis and characterization of some crystalline garnets by sol-gel techniques is described. The effects of emthanol, dimethyl sulfoxide (DMSO), CH2Cl2 and toluene solvents on gelation of TEOS are considered. Multicomponent gel formation in systems with stoichiometries 3CaO·Cr2O3·3SiO2 and 3CaO·Al2O2 was studied using DMSO, a polar solvent, and toluene, an apolar solvent. The dried gel was thermally treated and the powder was characterized by X-ray diffraction, differential thermal analysis/thermogravimetric analysis and scanning electron microscopy.
Covalent and Ionic Functionalization of HLN Layered Perovskite by Sonochemical Methods
2017
We describe the functionalization of the layered perovskite HLaNb2O7 with n-propanol, n-decanol, 3-mercaptopropyl-trimethoxysilane, imidazole, n-decylamine, and histamine. The use of sonication is found to significantly improve the reaction yield and to reduce the reaction time, compared to conventional thermal treatment under reflux. The obtained intercalates are thoroughly characterized through the use of several complementary experimental techniques (scanning electron microscopy, IR spectroscopy, X-ray diffraction, thermogravimetric analysis, magic-angle spinning NMR), clarifying their structure and chemical bonding. The implications for the design of inorganic–organic composite material…
Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decompositon kinetics
2010
[EN] The disposal stage of polylactide (PLA) was assessed by burying it in active soil following an international standard. Degradation in soil promotes physical and chemical changes in the polylactide properties. The characterization of the extent of degradation underwent by PLA was carried out by using Thermal Analysis techniques. In this paper, studies on the thermal stability and the thermal decomposition kinetics were performed in order to assess the degradation process of a commercial PLA submitted to an accelerated soil burial test by means of multi-linear-non-isothermal thermogravimetric analyses. Results have been correlated to changes in molecular weight, showing the same evolutio…
Thermogravimetric analysis. A tool to evaluate the ability of mixtures in consolidating waterlogged archaeological woods
2010
Waterlogged archaeological woods (Pinus pinaster, Ulmus cf. minor and Fagus sylvatica L.) were consolidated by using Colophony, Rosin 100, and a mixture of Poly(ethylene) glycol (PEG) 3000 and Poly(propylene) glycol (PPG) 425. The efficiency of the consolidants was estimated by determining the content entrapped into the cavity of degraded wood. For this purpose, thermogravimetry was demonstrated to be a reliable tool. In the case that the polymeric mixture was used for impregnation, it was also possible to discriminate the amount of PEG 3000 from that of PPG 425 captured by the wood capillaries. Regardless of the wood nature, all the consolidants were present in treated samples in large amo…